How much dough for a pizza: weights by size, style and pan
Pizzerias do not guess dough weights. They use a thickness factor: a set weight of dough for every square inch of pizza. Double the area, double the dough. Here is that factor for each style, and the weights it gives.
Round pizzas
| Size | Neapolitan | New York | Roman thin |
|---|---|---|---|
| 8 in (20 cm) | 115 g 4.1 oz | 105 g 3.7 oz | 80 g 2.8 oz |
| 10 in (25 cm) | 180 g 6.3 oz | 165 g 5.8 oz | 125 g 4.4 oz |
| 12 in (30 cm) | 260 g 9.2 oz | 235 g 8.3 oz | 180 g 6.3 oz |
| 14 in (36 cm) | 355 g 12.5 oz | 320 g 11.3 oz | 245 g 8.6 oz |
| 16 in (41 cm) | 460 g 16.2 oz | 420 g 14.8 oz | 320 g 11.3 oz |
| 18 in (46 cm) | 585 g 20.6 oz | 530 g 18.7 oz | 405 g 14.3 oz |
The usual sizes are 10 to 13 inches for Neapolitan, 14 to 18 for New York and 12 to 14 for Roman. A home oven or a 12-inch steel decides your size more than the style does: measure the stone or steel before you choose.
Pans and skillets
| Pan | Thick: Detroit or Sicilian | Thinner: grandma style |
|---|---|---|
| 8 × 10 in Detroit pan | 285 g 10.1 oz | 210 g |
| 9 × 9 in square pan | 290 g 10.2 oz | 210 g |
| 9 × 13 in baking pan | 420 g 14.8 oz | 305 g |
| 10 × 14 in Detroit pan | 500 g 17.6 oz | 365 g |
| 13 × 18 in half-sheet pan | 835 g 29.5 oz | 610 g |
| 10 in cast-iron skillet | 280 g 9.9 oz | 205 g |
| 12 in cast-iron skillet | 405 g 14.3 oz | 295 g |
Pan dough is measured by area, so any rectangle works: multiply the two sides in inches and use about 3.6 g per square inch for a thick, airy pan pizza, or 2.6 g for a thinner grandma-style one. Measure the inside of the pan at the base, not the rim; sloped sides make the top look bigger than the floor really is.
The thickness factor
The weight for any size is the area of the pizza times the style's factor. For a round pizza, the area is the diameter times the diameter times 0.785.
| Style | Grams per sq in | Ounces per sq in | What you get |
|---|---|---|---|
| Roman thin | 1.6 | 0.056 | Thin to the edge, crisp, almost no rim |
| New York | 2.1 | 0.073 | Thin, foldable centre, modest chewy rim |
| Neapolitan | 2.3 | 0.081 | Very thin centre, tall puffy rim that takes much of the dough |
| Detroit pan | 3.6 | 0.126 | Thick, airy, fried at the edges |
Neapolitan has a higher factor than New York even though the middle is thinner, because so much of the dough goes into the cornicione, the raised rim. American pizzeria recipes commonly sit between 0.07 and 0.10 oz per square inch for New York; go up for a sturdier base, down for a thin one.
Worked example: a 14-inch New York pizza is 14 × 14 × 0.785 = 154 square inches. At 2.1 g per square inch that is 320 g of dough.
Three things a pizzaiolo would tell you
- Make a little extra. A few grams stay on the bowl, the bench and your hands. Balls usually come out 2 to 3% light. If every ball must be exact, make 3% more dough than you need, or simply divide the batch evenly and accept the difference.
- Weigh, don't eyeball, when you divide. Uneven balls rise at different speeds and stretch to different sizes. Cut with a scraper and add or pinch off small pieces until each is on weight.
- Stretch to the size, not past it. A ball that won't reach its size needs rest, not force. Cover it for 10 minutes and try again. If it springs back every time, it went into the fridge too tight or came out too late.
Let the calculator do it
In the pizza dough calculator, open "Change the dough" and pick a pizza or pan size. It sets the ball weight from the same factor, then works out the flour, water, yeast and timing for as many pizzas as you are making.
Open the pizza dough calculator
Keep going
Sources
- Everything not linked above is Ovenmark's own working, explained on How we work it out.